■ Charge the battery
The GPS module has an internal, nonremovable,
rechargeable battery. Do not attempt to remove the battery
from the GPS module, as you may damage it.
1. Connect the charger to a wall outlet.
2. Open the cover of the
charger connector,
and connect the
charger cable to the
connector. The GPS
module switches on.
During charging, the battery charge indicator light
flashes red (if the module is off) or alternates green and
red (if the module is on). It may take a while before
charging starts. If charging does not start, disconnect
the charger, plug it in again, and retry.
GPS
G e t s t a r t e d
12
Charging the battery for 15 minutes provides about 6
hours of operating time with the AC-4, AC-5, and DC-4
chargers. Charging the battery fully may take up to
1 hour.
3. When the battery is fully charged, the indicator light
turns green. Disconnect the charger from the GPS
module and the wall outlet.
The fully charged battery has power for up to 11 hours of
operating time. However, the operating time may vary when
used with different compatible Bluetooth devices, usage
settings, usage styles, and environments.
When battery power falls low, the battery charge indicator
light starts to flash red. Recharge the battery.
B a s i c u s e
13
3.